The TILT-5x dynamic tilt sensor / inclinometer family is a series of high performance, high resolution three axis digital dynamic or gyro compensated inclinometers that use the latest miniature technology in the form of accelerometer and gyroscope MEMS sensors. These newly developed sensors can provide a variety of relevant data that can be used across multiple industries. The 5x series can offer improvements in cost, size, and power consumption. The sensor is contained within a robust aluminum housing and has several interface options such as USB, RS232, RS485, RS422, and 3.3 VTTL UART.
Industrial design
TILT-5X Inclinometer Series has an anodized aluminum case. These sensors are tested to satisfy IP67 certification and can temporarily be immersed in 1 meter depth of water.
Smart data communication
TILT-5X Inclinometer series has two LEDs that show the communication status of sensors while receiving data, sending data or computing offline.
Versatile interface
The 6-Pin connectors for TILT-5x Tilt series are IP67 certified and guarantee the consistency of data communication in harsh environments. Output supported protocols are RS232, RS422, RS485, USB, SSI, and wireless
TILT-57A
| Power source: 4.1 – 38 VDC | Accelerometer range: ±2 g /±4 g /±8 g selectable |
| Power consumption: < 400 mW (80 mA @ 5 V) | Accelerometer noise density: 25 μg/√Hz |
| Measuring range: Pitch: ±90° , Roll: ±180° | Gyroscope range: ±125 to ±2000 °/s selectable |
| Resolution: < 0.003° | 0.1 mg | Output data rate: 1 Hz to 2 kHz selectable |
| Static accuracy: ≤ 0.03° (Typical) | Baud rate: 2.4kbps – 921.6kbps |
| Dynamic accuracy (RMS): ≤ 0.5° (Typical) | Data format: ASCII, similar to NMEA 0183 protocol |
| Zero offset error: < ±0.02° (@20°C) | GUI Software: WinCTi-Tilt-57® |
| Shock standard: MIL-STD-202H, Method 213 Half-Sine, 0.5 ms, 2000 g | Vibration standard: MIL-STD-202H, Method 214 50-2000Hz, 15 min/axis, Overall RMS: 5.35 g |
TILT-57A Documents | |
 | |
| Product Brief | Datasheet |
TILT-55A
| Power source: 4.1 – 38 VDC | Accelerometer range: ±2 g /±4 g /±8 g selectable |
| Measuring range: Pitch: ±90° , Roll: ±180° | Gyroscope range: ±250 to ±2000 °/s selectable |
| Resolution: ≤ 0.005° | 0.1 mg | Output data rate: 1 Hz to 400 Hz selectable |
| Static accuracy: ≤ 0.05° (Typical) | Baud rate: 2.4kbps – 921.6kbps |
| Dynamic accuracy (RMS): ≤ 0.75° (Typical) | Data format: ASCII, similar to NMEA 0183 protocol |
| Zero offset error: < ±0.03° (@20°C) | Power consumption: <250 mW (<50 mA @ 5 V) |
| Noise density: 0.002°/√Hz | GUI Software: WinCTi-Tilt® |
TILT-55A Documents | |
| |
| Product Brief | Datasheet |
TILT-50A
| Power source: 4.1 – 38 VDC | Accelerometer range: ±2 g /±4 g /±8 g selectable |
| Measuring range: Pitch: ±90° , Roll: ±180° | Gyroscope range: ±250 to ±2000 °/s selectable |
| Resolution: ≤ 0.025° | 0.5 mg | Output data rate: 1 Hz to 200 Hz selectable |
| Static accuracy: ≤ 0.15° (Typical) | Baud rate: 2.4kbps – 921.6kbps |
| Dynamic accuracy (RMS): ≤ 1.0° (Typical) | Data format: ASCII, similar to NMEA 0183 protocol |
| Zero offset error: < ±0.1° (@20°C) | Power consumption: <250 mW (<50 mA @ 5 V) |
| Noise density: 0.01°/√Hz | GUI Software: WinCTi-Tilt® |
TILT-50A Documents | |
| |
| Product Brief | Datasheet |